Department of Biology, University of Puerto Rico, Mayaguez, PR, 00680, USA.
J Mater Sci Mater Med. 2014 Jun;25(6):1577-87. doi: 10.1007/s10856-014-5179-3. Epub 2014 Feb 28.
The adhesion and proliferation of human fetal osteoblasts, hFOB 1.19, on micro arc oxidized (MAO) gamma titanium aluminide (γTiAl) surfaces were examined in vitro. Cells were seeded on MAO treated γTiAl disks and incubated for 3 days at 33.5 °C and subsequently for 7 days at 39.5 °C. Samples were then analyzed by scanning electron microscopy (SEM) and alkaline phosphatase assay (ALP) to evaluate cell adhesion and differentiation, respectively. Similar Ti-6Al-4V alloy samples were used for comparison. Untreated γTiAl and Ti-6Al-4V disks to study the effect of micro arc oxidation and glass coverslips as cell growth controls were also incubated concurrently. The ALP Assay results, at 10 days post seeding, showed significant differences in cell differentiation, with P values <0.05 between MAO γTiAl and MAO Ti-6Al-4V with respect to the corresponding untreated alloys. While SEM images showed that hFOB 1.19 cells adhered and proliferated on all MAO and untreated surfaces, as well as on glass coverslips at 10 days post seeding, cell differentiation, determined by the ALP assay, was significantly higher for the MAO alloys.
体外研究了人胎成骨细胞(hFOB 1.19)在微弧氧化(MAO)处理的γ钛铝(γTiAl)表面的黏附和增殖情况。将细胞接种在 MAO 处理的 γTiAl 盘上,在 33.5°C 下孵育 3 天,然后在 39.5°C 下孵育 7 天。然后通过扫描电子显微镜(SEM)和碱性磷酸酶测定(ALP)分别分析样品,以评估细胞黏附和分化情况。还使用了类似的 Ti-6Al-4V 合金样品进行比较。同时孵育未经处理的 γTiAl 和 Ti-6Al-4V 圆盘以研究微弧氧化的影响以及玻璃盖玻片作为细胞生长对照。ALP 测定结果显示,在接种后 10 天,细胞分化存在显著差异,MAO γTiAl 和 MAO Ti-6Al-4V 与相应的未处理合金之间的 P 值<0.05。虽然 SEM 图像显示 hFOB 1.19 细胞在接种后 10 天在所有 MAO 和未经处理的表面以及玻璃盖玻片上黏附和增殖,但通过 ALP 测定确定的细胞分化在 MAO 合金中明显更高。