Department of Physics, University of Central Florida, Orlando, Florida 32816, USA.
Department of Physics, Ruhr-University Bochum, 44780 Bochum, Germany.
Nat Commun. 2016 Jun 30;7:12123. doi: 10.1038/ncomms12123.
There is an urgent need to develop technologies that use renewable energy to convert waste products such as carbon dioxide into hydrocarbon fuels. Carbon dioxide can be electrochemically reduced to hydrocarbons over copper catalysts, although higher efficiency is required. We have developed oxidized copper catalysts displaying lower overpotentials for carbon dioxide electroreduction and record selectivity towards ethylene (60%) through facile and tunable plasma treatments. Herein we provide insight into the improved performance of these catalysts by combining electrochemical measurements with microscopic and spectroscopic characterization techniques. Operando X-ray absorption spectroscopy and cross-sectional scanning transmission electron microscopy show that copper oxides are surprisingly resistant to reduction and copper(+) species remain on the surface during the reaction. Our results demonstrate that the roughness of oxide-derived copper catalysts plays only a partial role in determining the catalytic performance, while the presence of copper(+) is key for lowering the onset potential and enhancing ethylene selectivity.
目前迫切需要开发利用可再生能源的技术,将二氧化碳等废物转化为碳氢燃料。在铜催化剂的作用下,二氧化碳可以通过电化学还原转化为碳氢化合物,但需要更高的效率。我们开发了氧化铜催化剂,通过简便且可调的等离子体处理,表现出更低的二氧化碳电还原过电势和对乙烯(60%)的高选择性。在此,我们通过将电化学测量与微观和光谱表征技术相结合,深入了解了这些催化剂性能的提高。在位 X 射线吸收光谱和截面扫描透射电子显微镜显示,氧化铜令人惊讶地难以还原,并且在反应过程中铜(+)物种仍然留在表面。我们的结果表明,氧化物衍生的铜催化剂的粗糙度仅部分决定了催化性能,而铜(+)的存在对于降低起始电位和提高乙烯选择性至关重要。