Skariyachan Sinosh, Setlur Anagha Shamsundar, Naik Sujay Yashwant, Naik Ashwini Amaresh, Usharani Makam, Vasist Kiran S
R&D Centre, Department of Biotechnology Engineering, Dayananda Sagar Institutions, Bangalore, 560 078, India.
Visvesvaraya Technological University, Belagavi, Karnataka, India.
Environ Sci Pollut Res Int. 2017 Mar;24(9):8443-8457. doi: 10.1007/s11356-017-8537-0. Epub 2017 Feb 10.
The current study aimed to devise eco-friendly, safe, and cost-effective strategies for enhanced degradation of low- and high-density polyethylene (LDPE and HDPE) using newly formulated thermophilic microbial consortia from cow dung and to assess the biodegradation end products. The plastic-degrading bacteria from cow dung samples gathered from highly plastic-acclimated environments were enriched by standard protocols. The degradation ability was comprehended by zone of clearance method, and the percentage of degradation was monitored by weight reduction process. The best isolates were characterized by standard microbiological and molecular biology protocols. The best isolates were employed to form several combinations of microbial consortia, and the degradation end products were analyzed. The stability of 16S ribosomal DNA (rDNA) was predicted by bioinformatics approach. This study identified 75 ± 2, 55 ± 2, 60 ± 3, and 43 ± 3% degradation for LDPE strips, pellets, HDPE strips, and pellets, respectively, for a period of 120 days (p < 0.05) at 55 °C by the formulated consortia of IS1-IS4, and the degradation efficiency was found to be better in comparison with other formulations. The end product analysis by Fourier transform infrared, scanning electron microscopy, energy-dispersive spectroscopy, and nuclear magnetic resonance showed major structural changes and formation of bacterial biofilm on plastic surfaces. These novel isolates were designated as Bacillus vallismortis bt-dsce01, Psuedomonas protegens bt-dsce02, Stenotrophomonas sp. bt-dsce03, and Paenibacillus sp.bt-dsce04 by 16S rDNA sequencing and suggested good gene stability with minimum Gibb's free energy. Therefore, this study imparts substantial information regarding the utilization of these thermophilic microbial consortia from cow dung for rapid polyethylene removal.
本研究旨在设计生态友好、安全且经济高效的策略,利用新配制的源自牛粪的嗜热微生物群落来增强低密度和高密度聚乙烯(LDPE和HDPE)的降解,并评估生物降解终产物。通过标准方案富集从高度适应塑料环境收集的牛粪样品中的塑料降解细菌。通过透明圈法理解降解能力,并通过减重过程监测降解百分比。通过标准微生物学和分子生物学方案对最佳分离株进行表征。使用最佳分离株形成几种微生物群落组合,并分析降解终产物。通过生物信息学方法预测16S核糖体DNA(rDNA)的稳定性。本研究发现,在55°C下,经IS1 - IS4配制的菌群对LDPE条、粒料、HDPE条和粒料在120天内的降解率分别为75±2%、55±2%、60±3%和43±3%(p<0.05),且与其他配方相比,降解效率更高。通过傅里叶变换红外光谱、扫描电子显微镜、能量色散光谱和核磁共振进行的终产物分析表明,塑料表面发生了主要结构变化并形成了细菌生物膜。通过16S rDNA测序,这些新型分离株被鉴定为死谷芽孢杆菌bt - dsce01、产碱假单胞菌bt - dsce02、嗜麦芽窄食单胞菌bt - dsce03和类芽孢杆菌bt - dsce04,且显示出具有最小吉布斯自由能的良好基因稳定性。因此,本研究提供了关于利用这些源自牛粪的嗜热微生物群落快速去除聚乙烯的大量信息。