Pan African University Institute of Science, Technology and Innovation, Nairobi, Kenya.
Department of Pure & Applied Sciences, Technical University of Mombasa, Mombasa, Kenya.
PLoS One. 2018 Jul 6;13(7):e0198446. doi: 10.1371/journal.pone.0198446. eCollection 2018.
This study aimed at isolating and identifying bacteria and fungi with the capacity to degrade low density polyethylene (LDPE). The level of biodegradation of LDPE sheets with bacterial and fungal inoculums from different sampling points of Dandora dumpsite was evaluated under laboratory conditions. Incubation of the LDPE sheets was done for sixteen weeks at 37°C and 28°C for bacteria and fungi respectively in a shaker incubator. Isolation of effective candidates for biodegradation was done based on the recorded biodegradation outcomes. The extent of biodegradation on the polyethylene sheets was assessed by various techniques including weight loss analysis, Fourier Transform Infrared Spectroscopy (FTIR) and GC-MS. Fourier Transform Infra-Red spectroscopy (FTIR) analysis revealed the appearance of new functional groups attributed to hydrocarbon degradation after incubation with the bacteria and fungi. Analysis of the 16S rDNA and 18S rDNA sequences for bacteria and fungi respectively showed that bacteria belonging to genera Pseudomonas, Bacillus, Brevibacillus, Cellulosimicrobium, Lysinibacillus and fungi of genus Aspergillus were implicated as polyethylene degraders. An overall analysis confirmed that fungi are generally better degraders of polyethylene than bacteria. The highest fungal degradation activity was a mean weight reduction of 36.4±5.53% attributed to Aspergillus oryzae strain A5, 1 (MG779508). The highest degradation activity for bacteria was a mean of 35.72± 4.01% and 20.28± 2.30% attributed to Bacillus cereus strain A5,a (MG645264) and Brevibacillus borstelensis strain B2,2 (MG645267) respectively. Genus Aspergillus, Bacillus and Brevibacillus were confirmed to be good candidates for Low Density Poly Ethene bio-degradation. This was further confirmed by the appearance of the aldehyde, ether and carboxyl functional groups after FTIR analysis of the polythene sheets and the appearance of a ketone which is also an intermediary product in the culture media. To improve this degrading capacity through assessment of optimum conditions for microbial activity and enzyme production will enable these findings to be applied commercially and on a larger scale.
本研究旨在分离和鉴定具有降解低密度聚乙烯(LDPE)能力的细菌和真菌。在实验室条件下,评估了来自 Dandora 垃圾场不同采样点的细菌和真菌接种物对 LDPE 片的生物降解水平。将 LDPE 片在摇床培养箱中分别于 37°C 和 28°C 下孵育 16 周。基于记录的生物降解结果,进行了有效生物降解候选物的分离。通过各种技术评估聚乙烯片上的生物降解程度,包括失重分析、傅里叶变换红外光谱(FTIR)和 GC-MS。傅里叶变换红外光谱(FTIR)分析表明,在用细菌和真菌孵育后,出现了归因于碳氢化合物降解的新官能团。对细菌和真菌的 16S rDNA 和 18S rDNA 序列进行分析表明,属于假单胞菌属、芽孢杆菌属、短芽孢杆菌属、纤维二糖微菌属、解淀粉芽孢杆菌属和曲霉属的细菌被认为是聚乙烯降解菌。综合分析证实,真菌通常比细菌更能降解聚乙烯。最高的真菌降解活性是曲霉属 A5,1(MG779508)菌株导致的平均重量减少 36.4±5.53%。细菌的最高降解活性为平均 35.72±4.01%和 20.28±2.30%,分别归因于芽孢杆菌属 A5,a(MG645264)和短芽孢杆菌属 B2,2(MG645267)菌株。曲霉属、芽孢杆菌属和短芽孢杆菌属被证实是低密度聚乙烯生物降解的良好候选物。这进一步通过 FTIR 分析聚乙烯片后醛、醚和羧基官能团的出现以及培养介质中酮的出现得到证实,酮也是中间产物。通过评估微生物活性和酶产生的最佳条件来提高这种降解能力,将使这些发现能够在商业和更大规模上得到应用。