Suppr超能文献

利用冷冻软 X 射线断层成像技术对线粒体嵴复杂度进行三维成像。

Three-dimensional imaging of mitochondrial cristae complexity using cryo-soft X-ray tomography.

机构信息

Brazilian Synchrotron Light Laboratory (LNLS), Brazilian Centre for Research in Energy and Materials (CNPEM), Campinas, SP, 13083-970, Brazil.

Laboratory of Genetics and Molecular Cardiology, Heart Institute (InCor), University of São Paulo Medical School, São Paulo, SP, Brazil.

出版信息

Sci Rep. 2020 Dec 3;10(1):21045. doi: 10.1038/s41598-020-78150-3.

Abstract

Mitochondria are dynamic organelles that change morphology to adapt to cellular energetic demands under both physiological and stress conditions. Cardiomyopathies and neuronal disorders are associated with structure-related dysfunction in mitochondria, but three-dimensional characterizations of the organelles are still lacking. In this study, we combined high-resolution imaging and 3D electron density information provided by cryo-soft X-ray tomography to characterize mitochondria cristae morphology isolated from murine. Using the linear attenuation coefficient, the mitochondria were identified (0.247 ± 0.04 µm) presenting average dimensions of 0.90 ± 0.20 µm in length and 0.63 ± 0.12 µm in width. The internal mitochondria structure was successfully identified by reaching up the limit of spatial resolution of 35 nm. The internal mitochondrial membranes invagination (cristae) complexity was calculated by the mitochondrial complexity index (MCI) providing quantitative and morphological information of mitochondria larger than 0.90 mm in length. The segmentation to visualize the cristae invaginations into the mitochondrial matrix was possible in mitochondria with MCI ≥ 7. Altogether, we demonstrated that the MCI is a valuable quantitative morphological parameter to evaluate cristae modelling and can be applied to compare healthy and disease state associated to mitochondria morphology.

摘要

线粒体是动态细胞器,可在生理和应激条件下改变形态以适应细胞能量需求。心肌病和神经紊乱与线粒体的结构相关功能障碍有关,但细胞器的三维特征仍然缺乏。在这项研究中,我们结合高分辨率成像和冷冻软 X 射线断层扫描提供的三维电子密度信息,对从小鼠中分离出的线粒体嵴形态进行了特征描述。使用线性衰减系数,识别出线粒体(0.247 ± 0.04 µm),长度的平均尺寸为 0.90 ± 0.20 µm,宽度为 0.63 ± 0.12 µm。通过达到 35nm 的空间分辨率极限,成功地识别了内部线粒体结构。通过线粒体复杂度指数(MCI)计算了内部线粒体膜内陷(嵴)的复杂度,为长度大于 0.90mm 的线粒体提供了定量和形态信息。在 MCI≥7 的线粒体中,可以对嵴向内层线粒体基质的凹陷进行可视化分割。总的来说,我们证明 MCI 是评估嵴建模的有价值的定量形态参数,并可用于比较与线粒体形态相关的健康和疾病状态。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7ea5/7713364/0a7a5137d623/41598_2020_78150_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验