Zhong Wei, Li Guoyuan, Lan Linfeng, Li Bin, Chen Rongsheng
School of Electronic and Information Engineering, South China University of Technology Guangzhou China
School of Materials Science and Engineering, South China University of Technology Guangzhou China.
RSC Adv. 2018 Oct 10;8(61):34817-34822. doi: 10.1039/c8ra06692b.
Indium-tin-zinc-oxide (ITZO) as the channel layer grown by co-sputtering of ZnO target and ITO target in the bottom gate thin-film transistors (TFTs) is proposed in this work. The microstructure and optical properties of ITZO thin films at different annealing temperatures were analyzed. The impact of various annealing temperatures on the ITZO TFT performance characteristics was systematically investigated as well. It was found that ITZO TFT with annealing temperature of 300 °C exhibits excellent electrical performance with a high saturation field-effect mobility ( ) of 27.4 cm V s, a low threshold voltage ( ) of -0.64 V, a small subthreshold swing (SS) value of 0.23 V per decade, and the high on-off current ratio ( / ) of 1.8 × 10. In addition, it also shows good output curves including gate control capabilities and good electrode contact as well as extreme atmospheric stability. As shown by photoluminescence (PL) analysis and X-ray photoelectron spectroscopy (XPS) analysis, the beneficial effects of various annealing temperatures on device performance are attributed to the reorganization of the amorphous network and the control of defect chemistry in the films. The correlation between the post-deposition thermal treatment and the characteristics of a transistor was investigated and excellent performance of the transistor was demonstrated.
本文提出了一种在底栅薄膜晶体管(TFT)中通过共溅射ZnO靶和ITO靶生长铟锡氧化锌(ITZO)作为沟道层的方法。分析了不同退火温度下ITZO薄膜的微观结构和光学性质。还系统地研究了各种退火温度对ITZO TFT性能特性的影响。结果发现,退火温度为300℃的ITZO TFT表现出优异的电学性能,具有27.4 cm² V⁻¹ s⁻¹的高饱和场效应迁移率( )、-0.64 V的低阈值电压( )、每十倍频程0.23 V的小子阈值摆幅(SS)值以及1.8×10⁷的高开关电流比( / )。此外,它还显示出良好的输出曲线,包括栅极控制能力、良好的电极接触以及极高的大气稳定性。光致发光(PL)分析和X射线光电子能谱(XPS)分析表明,各种退火温度对器件性能的有益影响归因于非晶网络的重组和薄膜中缺陷化学的控制。研究了沉积后退火处理与晶体管特性之间的相关性,并证明了晶体管的优异性能。