Institute for Building Materials, ETH Zurich, Switzerland.
Department of Mechanical and Aerospace Engineering, University of California San Diego, San Diego, CA, USA.
J Mech Behav Biomed Mater. 2023 Dec;148:106198. doi: 10.1016/j.jmbbm.2023.106198. Epub 2023 Oct 18.
Advanced-Glycation-Endproducts (AGEs) are known to be a major cause of impaired tissue material properties. In collagen fibrils, which constitute a major building component of human tissue, these AGEs appear as fibrillar cross-links. It has been shown that when AGEs accumulate in collagen fibrils, a process often caused by diabetes and aging, the mechanical properties of the collagen fibril are altered. However, current knowledge about the mechanical properties of different types of AGEs, and their quantity in collagen fibrils is limited owing to the scarcity of available experimental data. Consequently, the precise relationship between the nano-scale cross-link properties, which differ from type to type, their density in collagen fibrils, and the mechanical properties of the collagen fibrils at larger scales remains poorly understood. In our study, we use coarse-grained molecular dynamics simulations and perform destructive tensile tests on collagen fibrils to evaluate the effect of different cross-link densities and their mechanical properties on collagen fibril deformation and fracture behavior. We observe that the collagen fibril stiffens at high strain levels when either the AGEs density or the loading energy capacity of AGEs are increased. Based on our results, we demonstrate that this stiffening is caused by a mechanism that favors energy absorption via stretching rather than inter-molecular sliding. Hence, in these cross-linked collagen fibrils, the absorbed energy is stored rather than dissipated through friction, resulting in brittle fracture upon fibrillar failure. Further, by varying multiple AGEs nano-scale parameters, we show that the AGEs loading energy capacity is, aside from their density in the fibril, the unique factor determining the effect of different types of AGEs on the mechanical behavior of collagen fibrils. Our results show that knowing AGEs properties is crucial for a better understanding of the nano-scale origin of impaired tissue behavior. We further suggest that future experimental investigations should focus on the quantification of the loading energy capacity of AGEs as a key property for their influence on collagen fibrils.
晚期糖基化终末产物(AGEs)已知是组织材料特性受损的主要原因。在胶原纤维中,这些 AGEs 表现为纤维状交联,胶原纤维是人体组织的主要组成部分。已经表明,当 AGEs 在胶原纤维中积累时,胶原纤维的机械性能会发生改变,这个过程通常是由糖尿病和衰老引起的。然而,由于可用的实验数据有限,目前对不同类型的 AGEs 的机械性能及其在胶原纤维中的数量知之甚少。因此,纳米级交联特性(各有不同)与其在胶原纤维中的密度,以及在较大尺度上胶原纤维的机械性能之间的精确关系仍然知之甚少。在我们的研究中,我们使用粗粒化分子动力学模拟,并对胶原纤维进行破坏性拉伸测试,以评估不同交联密度及其机械性能对胶原纤维变形和断裂行为的影响。我们观察到,当 AGEs 密度或 AGEs 的加载能量容量增加时,胶原纤维在高应变水平下会变硬。基于我们的结果,我们证明这种变硬是由于一种通过拉伸而不是分子间滑动来有利于能量吸收的机制引起的。因此,在这些交联胶原纤维中,吸收的能量被储存起来而不是通过摩擦耗散,从而导致纤维断裂时脆性断裂。此外,通过改变多个 AGEs 的纳米级参数,我们表明,除了它们在纤维中的密度之外,AGEs 的加载能量容量是唯一决定不同类型的 AGEs 对胶原纤维机械行为影响的因素。我们的研究结果表明,了解 AGEs 的特性对于更好地理解组织行为受损的纳米级起源至关重要。我们进一步建议,未来的实验研究应侧重于量化 AGEs 的加载能量容量作为其对胶原纤维影响的关键特性。