Suppr超能文献

钛-6铝-7铌促进成骨样细胞的细胞铺展以及纤连蛋白和骨桥蛋白的合成。

Ti-6Al-7Nb promotes cell spreading and fibronectin and osteopontin synthesis in osteoblast-like cells.

作者信息

Osathanon Thanaphum, Bespinyowong Kritchai, Arksornnukit Mansuang, Takahashi Hidekazu, Pavasant Prasit

机构信息

Department of Anatomy, Faculty of Dentistry, Chulalongkorn University, Henri-Dunant Rd., Pathumwan, Bangkok, 10330, Thailand.

出版信息

J Mater Sci Mater Med. 2006 Jul;17(7):619-25. doi: 10.1007/s10856-006-9224-8.

Abstract

The purpose of this study was to compare the early response of human osteoblast-like cells (SaOS-2) on commercially pure titanium (cpTi) and titanium-6-aluminium-7-niobium (Ti-6Al-7Nb) using glass slide as a control. In terms of cell attachment, no significance was observed when cells were seeded on the materials. However, morphological analysis by scanning electron microscope revealed that cells on Ti-6Al-7Nb showed better spreading after 4 hrs. After 48 hrs, both Western analysis and reverse transcription polymerase chain reaction analyses showed that cells cultured on Ti-6Al-7Nb synthesized a higher amount of fibronectin and osteopontin as compared to cells seeded on cpTi or on glass slide. These results suggest that Ti-6Al-7Nb possess a good potential to support SaOS-2 cells on spreading and fibronectin and osteopontin synthesis, therefore, this material may be one of a candidate material used in implant dentistry.

摘要

本研究的目的是使用载玻片作为对照,比较人成骨样细胞(SaOS-2)在商业纯钛(cpTi)和钛-6-铝-7-铌(Ti-6Al-7Nb)上的早期反应。就细胞附着而言,当细胞接种在材料上时未观察到显著差异。然而,扫描电子显微镜的形态学分析显示,在Ti-6Al-7Nb上的细胞在4小时后铺展得更好。48小时后,蛋白质免疫印迹分析和逆转录聚合酶链反应分析均表明,与接种在cpTi或载玻片上的细胞相比,在Ti-6Al-7Nb上培养的细胞合成了更多的纤连蛋白和骨桥蛋白。这些结果表明,Ti-6Al-7Nb在支持SaOS-2细胞铺展以及纤连蛋白和骨桥蛋白合成方面具有良好的潜力,因此,这种材料可能是口腔种植学中使用的候选材料之一。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验