Suppr超能文献

用于可扩展量子计算的集成微波到光学接口。

An integrated microwave-to-optics interface for scalable quantum computing.

作者信息

Weaver Matthew J, Duivestein Pim, Bernasconi Alexandra C, Scharmer Selim, Lemang Mathilde, Thiel Thierry C van, Hijazi Frederick, Hensen Bas, Gröblacher Simon, Stockill Robert

机构信息

QphoX B.V., Delft, The Netherlands.

出版信息

Nat Nanotechnol. 2024 Feb;19(2):166-172. doi: 10.1038/s41565-023-01515-y. Epub 2023 Oct 5.

Abstract

Microwave-to-optics transduction is emerging as a vital technology for scaling quantum computers and quantum networks. To establish useful entanglement links between qubit processing units, several key conditions must be simultaneously met: the transducer must add less than a single quantum of input-referred noise and operate with high efficiency, as well as large bandwidth and high repetition rate. Here we present a design for an integrated transducer based on a planar superconducting resonator coupled to a silicon photonic cavity through a mechanical oscillator made of lithium niobate on silicon. We experimentally demonstrate its performance with a transduction efficiency of 0.9% with 1 μW of continuous optical power and a spectral bandwidth of 14.8 MHz. With short optical pulses, we measure the added noise that is limited to a few photons, with a repetition rate of up to 100 kHz. Our device directly couples to a 50 Ω transmission line and can be scaled to a large number of transducers on a single chip, laying the foundations for distributed quantum computing.

摘要

微波到光学的转换正成为扩展量子计算机和量子网络的一项关键技术。为了在量子比特处理单元之间建立有用的纠缠链接,必须同时满足几个关键条件:换能器必须添加少于单个量子的输入参考噪声,并以高效率运行,同时具备大带宽和高重复率。在此,我们展示了一种基于平面超导谐振器的集成换能器设计,该谐振器通过硅基铌酸锂制成的机械振荡器与硅光子腔耦合。我们通过实验证明了其性能,在1 μW连续光功率下转换效率为0.9%,光谱带宽为14.8 MHz。使用短光脉冲时,我们测量到添加的噪声限制在几个光子以内,重复率高达100 kHz。我们的器件直接耦合到50 Ω传输线,并且可以在单个芯片上扩展为大量换能器,为分布式量子计算奠定了基础。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验